Sensor, expansion board, dock and accessory guides for Shimmer3 and Shimmer3R.
Accelerometers, gyroscope and magnetometer: how they work, how to use their data, calibrating them, and the sensors' ranges and rates.
Measuring ECG with the ExG unit: leads and electrode placement, configuration, signal quality and heart rate.
Measuring EMG with the ExG unit: electrode positioning, configuration and common signal processing.
Galvanic skin response: measurement ranges, electrodes, skin resistance, and the 3.5 mm jack for optical pulse sensing.
Prototyping boards for connecting your own analog, I2C, SPI and serial sensors.
Programming and debugging Shimmer3 firmware with a JTAG or Spy-Bi-Wire tool.
Measuring pulse with the optical finger probe or ear clip through the 3.5 mm jack, and converting PPG to heart rate.
Connecting your own analog, SPI, serial and parallel-bus sensors through the Shimmer's external connector.
Load cells, strain gauges and resistance measurement with the Bridge Amplifier+ unit, and calibrating them.
For firmware developers and repair: the connector and processor pin assignments for Shimmer3 and Shimmer3R, the Shimmer3 mainboard's block diagram and power switching, the Bluetooth radio, the microSD data path, the battery charger and LED conventions.
